Atomic absorption spectrometry of traces of tri- and hexavalent chromium

Summary Atomic absorption spectrometry combined with extraction is described for the determination of tri- and hexavalent chromium. The chromium diethyldithiocarbamate chelate was used for chromium (VI), whereas hydroxyquinolate or thenoyltrifluoroacetonate chelate for chromium(III). The method is rapid and precise.

---

Zusammenfassung Extraktion und darauffolgende Messung der Atomarabsorption wurden zur Bestimmung von drei- und sechswertigem Chrom verwendet. Die Chelatverbindung mit Diäthyldithiocarbamat wurde für Chrom(VI), der Chelatkomplex mit Hydroxychinolin oder Thenoyltrifluoraceton für Chrom(III) verwendet. Das Verfahren ist rasch und genau.

     

Catalytic Active Site for NO Decomposition Elucidated by Surface Science and Real Catalyst

Comprehensive studies combining surface science and real catalyst were performed to get further insight into catalytic active site and reaction mechanism for NO decomposition over supported palladium and cobalt oxide-based catalysts. On palladium single-crystal model catalysts, adsorption, dissociation and desorption behavior of NO was found to be closely related to the surface structures, the stepped surface palladium being active for dissociation of NO. In accordance with this result, the activity of powder Pd/Al₂O₃ catalysts for NO decomposition was directly related to the number of step sites exposed on the surface, suggesting that the step sites act as the catalytic active site for NO decomposition on Pd/Al₂O₃. NO decomposition over cobalt oxide was found to be significantly promoted by addition of alkali metals. Surface science study and catalyst characterization led to the same conclusion that the interface between the alkali metal and Co₃O₄ serves as the catalytic active site. From the results of in situ Fourier transform infrared (FT-IR) spectroscopy and isotopic transient kinetic analysis, a reaction mechanism was proposed in which the reaction is initiated by NO adsorption onto alkali metals to form NO₂⁻ species and then NO₂⁻ species react with the adsorbed NO species to form N₂ over the interface between the alkali metal and Co₃O₄.     

The catalytic Mannich reaction of 1,1-difluoro-2-trialkyl(aryl)silyl-2-trimethyl-silyloxyethenes: preparation of beta-amino acid derivatives

[reaction: see text] Catalytic Mannich reactions of 1,1-difluoro-2-trialkyl(aryl)silyl-2-trimethylsilyloxyethenes (3) with a variety of sulfonylimines were utilized for the preparation of alpha,alpha-difluoro-beta-amino acid derivatives (7). The influence of the Lewis acid on the reaction was examined. Methods for the conversion of alpha,alpha-difluoroacylsilanes to alpha,alpha-difluorocarboxylic acids were also explored.     

Ionic-conductivity switching of vinyl malachite green leuconitrile copolymers based on photoinduced carrier generation

Copolymers of bis[4-(N,N-dimethylamino)phenyl]-4-vinylphenylmethanenitrile (vinyl Malachite Green leuconitrile) with methyl methacrylate or ω-methoxyoligo(oxyethylene) methacrylate have been synthesized, aiming at designing one-component-type organic polymers for photoswitchable ion-conducting films. The triphenylmethanenitrile copolymers with ω-methoxyoligo(oxyethylene) methacrylate were found to undergo ionic-conductivity switching by turning on and off UV light at ambient temperature, owing to their low glass transition temperature. © 1993 John Wiley & Sons, Inc.     

Spectroscopic study of atomization processes and inter-element effects on the flame emission of chromium and iron in an air—acetylene flame

Emission spectroscopy is applied for characterization of reactions occurring in air—acetylene flames normally used for atomic absorption spectrometry. Inter-element effects on the emissions of chromium and iron are discussed. Two atomic emission lines with different upper energies and a molecular emission line of the diatomic oxide MO are compared for determination of the excitation temperature and the degree of atomization in fuel-rich and lean flames. The reductive power of the fuel-rich flame is essential for atomization of chromium salts. Inter-element effects by iron can be attributed to the formation of refractory oxides, and to mutual catalytic oxidation.     

1-D cobalt(II) spin transition compound with strong interchain interaction: [Co(pyterpy)Cl(2)].X

Cobalt(II) compounds [Co(pyterpy)Cl(2)].MeOH (1.(MeOH)) and [Co(pyterpy)Cl(2)].2H(2)O (1.(2H(2)O)) were synthesized. The compound 1.(MeOH) forms the quasi 3-D networks by making pi-pi stacking between the 1-D chains. The methanol molecules from 1.(MeOH) can be removed by heating, and substituted by absorption of water molecules. The MeOH molecules in 1.(MeOH) are removed by heating at 410 K, and they are substituted by water molecules to form 1.(2H(2)O). 1.(2H(2)O) exhibits a S = (3)/(2) (HS) left arrow over right arrow S = (1)/(2) (LS) spin transition with a thermal hysteresis. We have succeeded in constructing a guest dependent 1-D spin-crossover cobalt(II) compound.     

Microwave spectrum of aminoborane,BH2NH2

The unstable species aminoborane, BH₂NH₂, has been identified as a reaction product of ammonia with diborane by microwave spectroscopy. The rotational constants determined are A = 138212 ± 4 MHz, B = 27487.83 ± 0.10 MHz and C = 22878.44 ± 0.11 MHz for ¹¹BH₂NH₂ and A = 138199 ± 6 MHz, B = 28420.36 ± 0.11 MHz and C = 23520.78 ± 0.12 MHz for ¹⁰BH₂NH₂. The dipole moment is 1.844 ± 0.015 D.     

Partialsynthesen und Reaktionen von Abietanderivaten (Lanugonen) aus Plectranthus lanuginosus und verwandten Verbindungen

Partial Syntheses and Reactions of Abietanoid Derivatives (Lanugones) from Plectranthus lanuginosus and of Related Compounds Interconversions by partial syntheses of several lanugones establish their absolute configuration at C(15). Unexpected reactions exemplify the unique reactivity of these abietanoic diterpenes, - Lanugone O ( 4 ) was prepared in several steps from (15S)-coleon C ( 8a ; Scheme 2) thus establishing its (15S)-configuration. One of the intermediates, the 12-O-acetyl-6-oxoroyleanone 12 , through acetyl-migration sets up an equilibrium with the vinylogous quinone 13 (Scheme 3). - The chirality at C(15) in the dihydrofuran moiety of lanugone Q ( 16 ) was proven by acid-catalyzed conversion of lanugone O ( 4 ) to 16 . - Instead of the usual nucleophilic attack shown by quinomethanes, lanugone L (1 ) is electrophilically substituted at C(7) by acetic anhydride/pyridine (Scheme 1). - In a homosigmatropic [1,5]-H-shift, lanugone G ( 17 ) in solution is converted to the corresponding allyl substituted royleanone 18 (Scheme 4). - Methanolysis of lanugone J ( 19 ) leads to the expected royleanone 20 having the 2-methoxypropyl side chain ( Scheme 5 ). Similar reactions were found in acetolytic reactions. However, treatment-of spirocoleons with SOCl₂/DMF produces mainly 12-deoxyroyleanones with allyl- and 2-chloropropyl groups, i. e. 19 → 26 and 27 ; 28 → 29 . The possible natural occurrence of these compounds is emphasized.     

A kinetic method for the determination of nanogram amounts of cadmium (II) by its catalytic effect on the complex formation of manganese(II) withα,β,γ,δ-tetra-(p-sulf onatophenyl) porphine

Summary Cadmium(II) accelerates the complex formation reaction of manganese (II) with, , , -tetra(p-sulfonatophenyl)porphine (H₂TPPS₄). Cadmium(II) concentration as low as 10^–7 mol dm^–3 can be determined from the decrease in absorbance at 413 nm (_max of H₂TPPS₄) at a fixed time after the start of the reaction of manganese(II) with H₂TPPS₄. After the separation of lead(II) by coprecipitation of manganese(IV) oxide, the method is highly selective and is free from interference of most substances usually encountered. Sandell's sensitivity calculated from the calibration curve at 30 min after the start of the reaction is 1.43×10^–1 ng cm^–2.

---

Eine kinetische Methode zur Bestimmung von Nanogrammengen von Cadmium(II) mit Hilfe seines katalytischen Effekts bei der Komplexbildung von Mangan(II) mit , , , -Tetra-(p-sulfonatophenyl)-porphin

Zusammenfassung Cadmium (II) beschleunigt die Komplexbildung von Mangan (II) mit, , , -Tetra-(p-sulfonatophenyl)-porphin (H₂TPPS₄). Konzentrationen bis zu 10^–7 Mol/l können durch Messung des Rückganges der Absorbanz bei 413 nm (_max von H₂TPPS₄) nach einer bestimmten Zeit gemessen werden. Nach Abtrennung von Blei(II) durch Mitfällung mit Mangan (IV)oxid ist die Methode sehr selektiv und frei von Störungen durch die meisten üblicherweise vorliegenden Substanzen. Die Empfindlichkeit nach Sandell, ermittelt aus der Eichkurve 30 min nach dem Start der Reaktion, beträgt 1,43×10^–1 ng/cm².

     

Coordination Behavior of Sterically Protected Phosphaalkenes on the AuCl Moiety Leading to Catalytic 1,6‐Enyne Cycloisomerization

Mes*‐substituted 2,3‐dimethyl‐1,4‐diphosphabuta‐1,3‐diene, 1,2‐diphenyl‐3,4‐diphosphinidenecyclobutene, 2,2‐bis(methylsulfanyl)‐1‐phosphaethene, and 3,3‐diphenyl‐1,3‐diphosphapropenes (Mes*=2,4,6‐tri‐tert‐butylphenyl) were employed as P ligands of gold(I) complexes. The (E,E)‐2,3‐dimethyl‐1,4‐diphosphabuta‐1,3‐diene functioned as a P2 ligand for digold(I) complex formation with or without intramolecular Au–Au contact, which depends on the conformation of the 1,3‐diphosphabuta‐1,3‐diene. The 1,2‐diphenyl‐3,4‐diphosphinidenecyclobutene, which has a rigid s‐cis P?C? C?P skeleton, afforded the corresponding digold(I) complexes with a slight distortion of the planar diphosphinidenecyclobutene framework and intramolecular Au–Au contact. In the case of the 2,2‐bis(methylsulfanyl)‐1‐phosphaethene, only the phosphorus atom coordinated to gold, and the sulfur atom showed almost no intra‐ or intermolecular coordination to gold. On the other hand, the 1,3‐diphosphapropenes behaved as nonequivalent P2 ligands to afford the corresponding mono‐ and digold(I) complexes. Some phosphaalkene–gold(I) complexes showed catalytic activity for 1,6‐enyne cycloisomerization without cocatalysts such as silver hexafluoroantimonate.